Chapter 2
1.
Locate the J2 Modem header on the mainboard.
2.
Plug the Fax/Modem DAA module into the J2 Modem header.
3.
Remove the blanking plate adjacent to the Fax/Modem DAA
module.
Line & Tel
RJ11 Sockets
J2 Modem Header
Modem DAA Module
VGA Extension Bracket
The VGA extension bracket has a 15-pin connector for an external
monitor cable.
VGA Extension
Bracket
VGA Header
1
1.
On the mainboard, locate the VGA header for this bracket.
2.
Plug the cable from the bracket into the VGA header.
3.
In the system chassis, remove a blanking plate from one of the
expansion slots and install the extension bracket in the slot.
Use the screw that held the blanking plate in place to secure
the extension bracket.
20
