manualshive.com logo in svg

PBI Dansensor MAP Check 9000, User Manual

Share
Download
PBI Dansensor MAP Check 9000 User Manual Download Page 35

PBI-220047-F 01/2008

COPYRIGHT ©

PBI-Dansensor A/S

9. Spare parts and optional accessories

MAP Check 9000 - User Manual

34

9. Spare parts and optional accessories

9.1. Optional accessories

For MAP Check 9001-1/4,MAP Check 9001-2,MAP Check 9002-1/2,MAP Check PFC:

• Option, current output 1. 0/4-20 mA (qty: 1)  . . . . . . . . . . . . . . . . . . . . . . . . . . .PBI 200804
• Option, voltage output 1. 0/2-10V (qty: 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PBI 200808
• Option, flow reg. MAP Check 9001-1/-4  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PBI 200807
• Option, multiplexer/scanner, three-channel, internal control (qty: 1) . . . . . . . .PBI 980254
• Option, 24VDC output (qty: 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PBI 970441
• Option, door with lock for operating panel (qty: 1)  . . . . . . . . . . . . . . . . . . . . . . . PBI 980751
• Option, current output MAP Check 9001-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PBI 980146
• Option, flow reg. MAP Check 9001-2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PBI 980147
• Option, multiplx. M.C.9001-4 3-CH int . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PBI 980830
• Option, multiplx. M.C.9001-4 3-CH ext. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PBI 980831
• Option, inlet pressure 1bar M.C.9001-4  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PBI 220123
• Option, inlet pressure 2bar M.C.9001-4  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PBI 220124
• Option, inlet pressure 3.5bar M.C.9001-4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PBI 220125
• Filter, active coal for 5/3-5/3 mm connection (qty: 1) . . . . . . . . . . . . . . . . . . . . PBI 970275
• Filter, active coal for 5/3-6/4 mm connection (qty: 1) . . . . . . . . . . . . . . . . . . . . PBI 970278
• Dust filter for 5/3-5/3 mm connection (qty: 1) . . . . . . . . . . . . . . . . . . . . . . . . . . PBI 970288
• Kit, filter, active coal, 5/3-5/3 w/white cup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . PBI 240030
• Kit, upgr. O2 sensor MAP Check 9001-1/2 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PBI 240791
• Kit, filter, active coal, 5/3-5/3 w/glass cup. . . . . . . . . . . . . . . . . . . . . . . . . . . . .PBI 250505
• Kit, filter, active coal, 5/3-6/4 w/glass cup. . . . . . . . . . . . . . . . . . . . . . . . . . . . .PBI 250565
• Kit, filter dust 5µ, 5/3-5/3 w/glass cup. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PBI 250566
• Kit, filter, active coal, without fittings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PBI 280005

9.2. Spare parts

For all MAP Check 9001 versions:

• Transport box (cardboard) 305x335x485mm (HxWxD) (qty: 1). . . . . . . . . . . . . PBI 960186
• User’s Manual, English (qty: 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PBI 220047
• User’s Manual, Danish (qty: 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PBI 220048
• User’s Manual, German (qty: 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PBI 220049
• User’s Manual, Italian (qty: 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PBI 220050
• User’s Manual, French (qty: 1) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PBI 220051
• User’s Manual, Portuguese (qty: 1)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PBI 220052
• Mains cable with connector, Denmark (qty: 1)  . . . . . . . . . . . . . . . . . . . . . . . . .   PBI 910499
• Mains cable with connector, UK (qty: 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .PBI 930066
• Mains cable with connector, other European countries (qty: 1). . . . . . . . . . . . . PBI 910505
• Mains cable with connector, USA (qty: 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PBI 930315
• Mains cable with connector, Italy (qty: 1). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . PBI 960247

Summary of Contents for MAP Check 9000














































Reviews:

No comments

Brands by name

Popular brands

Load more brands