If you do not specify a cut mode (cut last ticket, cut after batch, or
no cut before), the knife cuts after each tag. This is the same as
cut mode 1. The knife uses the last selected cut mode. For
example, if you select "Cut Last Ticket" and then select "Yes" to
"Cut After Batch," the knife only cuts after each batch instead of
after the last tag in the batch.
Cut multiple
[1/32000]: 1 _ _ _ _
12.
Type the number of tags to print before cutting and press
N
,
or accept the default value of 1 by pressing
N
. A cut
multiple of one cuts after each tag. This is the same as cut
mode 1.
Cut Last Ticket:
No
r
13.
If you want to cut the last tag in the batch, press
R
to
display "Yes" and press
N
. The printer feeds one or two
tags past the printhead when it cuts the last tag in the last
batch. Depending on the length of your supply, you may lose
up to two tags after the last batch. This is the same as cut
mode 3.
Cut After Batch:
No
r
14.
If you want to cut after every batch, press
R
to display "Yes"
and press
N
. The knife cuts before the first tag and cuts
after batch, so the tags are cuts in strips. This is the same as
cut mode 2.
No Cut Before?
No
r
Entering Batch Data
3-5
Summary of Contents for 939i
