Paxar 545 User Manual Download Page 39

Page: 39 / 121

Users Manual Model 545™

Control Panel Operation

•

Control Panel Operation

Control Buttons

Start

- Starts the printer.

- ON LINE light must be GREEN.

(Batches downloaded to be printed)

- If “Stopped For Splice” error condition exists: Fabric will be advanced

until the splice is beyond the print stations. Labels between the heads and
knife will be reproduced and stacked as finished labels.

Feed

- FEED and START must both be used.

- Feed will stop when the buttons are released.

- Labels between the heads and knife will be cut and stacked as finished

labels.

- Fabric moves through in one continuous strip.

- Fabric moves through without printing.

Test

- TEST and START must both be used.

- Test will stop when the buttons are released.

- Labels between the heads and knife will be cut and stacked as finished

labels.

- Fabric moves through in one continuous strip.

Summary of Contents for 545


























































































































Search results

Summary of Contents for 545

Reviews:

Brands by name

Popular brands

Paxar 545, User Manual

Search results

Summary of Contents for 545

Reviews:

Brands by name

Popular brands