manualshive.com logo in svg

Paxar 545, User Manual

Share
Download
Paxar 545 User Manual Download Page 11

Users Manual Model 545™

Unpacking / Inventory  

•

  9

Inventory of Components

The following list shows the additional parts (pieces) which should be included in
your PAXAR 545 shipping containers.  If anything is missing, notify PAXAR
immediately - in the U.S.A. at 570-888-9116.  In other countries please contact your
local PAXAR supplier.

- PAXAR 545 "User's Manual"

- Quick-disconnect power cord
- Serial communications cable & converter.
- Stacker assembly
- One or two print modules as ordered.
- PCMCIA Card containing special Swiss fonts for the 545 printer, also used to

store Logos or additional fonts that were special ordered.

   (located in the back of the manual)
- Any optional software ordered.
- Tool kit

NOTE: 

 Some of the above parts may be inside the envelope containing the tool kit.

PAXAR 545 TOOL KIT (#341390)

101324

7/64” Ball Driver

181301

2.5mm Ball Driver

241149

Anti-Static Gloves (2)

241132

Anti-Static Wrist Strap

351156

Chip Removal Tool

921309

Hex Key Set

921338

Printer Cleaning Kit

921352

Screwdriver

921353

Phillips Head Screwdriver

921362

Pkg. / Foam Cleaning Swabs (25)

921364

3/16" Long Ball Driver

Ink Cartridge Return Program

Empty ink cartridges can be returned to PAXAR for credit.  Please contact your
sales representative for more information.

Summary of Contents for 545


























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands