S300_V1.00.00 User Manual
NOTE: This document is CONFIDENTIAL and must be used exclusively for the operation of PAX programs. It may not be
duplicated, published, or disclosed without PAX prior written permission.
28
4.1.4
Credit PostAuth
Note
When authorization has previously been obtained via an AUTH
transaction, a PostAuth can be performed to complete the transaction
and receive payment.
Example:
X is on a travel to Hawaii and he has booked a room in a
hotel of Hawaii. He arrived at the hotel where he had booked a room. X
gives his personal information to clerk and gives his Credit card to clerk.
The clerk does a Credit Post-Auth on the S300 POS terminal and ECR.
After the transaction, the clerk gives the key to X and leads X to his
room.
X-Credit card holder
S
TEP
A
CTION
D
ISPLAY
1.
Be sure the terminal is at the Idle Prompt
2.
ECR sends message about the EDC Type and Transaction Type to POS.
The EDC Type is
“CREDIT” and the Transaction Type is “POSTAUTH”. If
ECR (Simulator) sends Transaction Type (00), it means the order of
Transaction Type is not available, press on the screen to select
“POSTAUTH” on S300.
Notice: If needed, message including Transaction Type, Amount, Tip, Cust.
#, Tax, Account, Exp. date, CVV, AVS, Table #, Guest #, Clerk/Server ID can
be input through ECR.
3.
Input the transaction # to
be completed.
CREDIT POSTAUTH
▋
Please Enter Trans. #
