The PATmicro will work with any activated 2G or 2G+3G SIM card. (PAYG or
Contract).
It will not work with a 3G only network SIM.
a) Some carriers provide SIM cards that require a PIN code before you start
using them for the first time or when you turn on the power.
b) The PATmicro will only work with this PIN code disabled. You can check this
by inserting the SIM into a mobile phone. If a PIN is required enter the PIN
code given to you by the carrier and disable the PIN code function from the
menu of the phone. How this is done will vary between phone manufacturers.
If there is a problem with the SIM the yellow LED will illuminate when you turn on
The PATmicro
Starting Up
Switching your device on and off
A) Power On
Press and hold ‘power button’ for 5 seconds. Each LED will turn on and blink 3 times
in sequence. You can release the power button once the LED’s start blinking.
B) Power Off
Press and hold ‘Power Button’ for 5 seconds. All LED’s will blink 3 times. You can
release the Power Button when the LED’s start blinking. Power is OFF when all LED’s
are off.
In normal use all LED’s are off and only come on at ‘wake up’ intervals. To check
status of device press and immediately release power button. If the blue LED flashes
once then the device is on. If all 3 LED’s come on, it is off. If no LED’s come on it
requires charging.
PawTrax
PATmicro
