Setting up a Safe Zone
By setting up a Safe Zone area you will receive a ZONE OUT sms report whenever
the PATmicro moves out of this designated area.
You can set up the radius as wide as you want in increments of 10 metres.
Before setting up the safe zone we recommend that you first let the PATmicro report
its current location by using the
C
Command to ensure that it has GPS data.
You will have to obtain the co-ordinates of the centre of the safe zone if it is different
from your current location.
You can obtain these co-ordinates from Google Earth. When you drag and point to
the centre of your required safe zone you will see the Lat/Lon co-ordinates at the
bottom of the Google Earth window.
These co-ordinates are then used in the following command.
In order to activate the Safe Zone function, the PATmicro must be awake while it is
located in the Safe Zone area so that it can recognize that it has entered into the
Safe Zone. Once it has recognised that it is within the zone it will report by sms
whenever it goes out of the zone.
* Command to set up the Safe Zone :
S Y
100
+22.36600 +114.11977
* Reply :
HP=D001=SET SAFE ZONE=DATE-06/09/2009=TIME-23:59:59=SPD-
110=DIR-359=
http://mapsgoogle.com/maps?q=+22.36600,+114.11977&%z=14
Notes for command: You should place a space between each letter and number and
also between latitude and longitude.
100
stands for
1 Km
Notes for reply : The PATmicro shall reply whether it gets GPS data or not and with
or without date and time information.
