4 Assembly and installation [specialist]
2018/06
99423x063MGK7-mub-en
–
V01
17
4.4
Assembly of the actuator for CoolBloC with flow on the left:
1.
Turn the rotary knob of the mixing
valve into position 10. The nose at
the rotary knob of the mixing valve
is thus in 7:30 o'clock position.
2.
Set the actuator to manual mode
by turning the selector switch.
3.
Turn the rotary knob of the
actuator to the left to the position
shown on the adjacent figure
(fig. 4).
4.
Put the actuator onto the rotary
knob as shown in figure 4 and
push it on the anti-rotation devices
until the actuator snaps in.
5.
Set the actuator back to automatic
mode.
Fig. 4
red