3 Product description
2018/06
99423x063MGK7-mub-en
–
V01
11
Change of the flow line [specialist]
Dismounting of the mixing valve
1.
Take off the thermometer handles (A-2, F-2) and remove the insulating front shell.
2.
Take the group of fittings out of the insulating back shell.
3.
Dismount the mixing valve (C).
Retrofitting of the mixing valve
1.
Loosen the screw (1).
2.
Take off the rotary knob (2) and the extension (3) from the cock rod.
3.
Loosen the screws (4).
4.
Remove the cover plate (5).
5.
Loosen the two screws (6).
6.
Remove the front plate (7).
7.
Extract the sealing bush (8) and the valve cock (9) from the mixing valve housing.
8.
Loosen the screws (11) on the rear side of the mixing valve.
9.
Take off the cover (10) on the rear side of the mixing valve and fix it on the other side
of the mixing valve by using the screws (11).
10.
Insert the sealing bush (8) and the valve cock (9) into the channel of the mixing valve.
Make sure that the o-ring is positioned correctly on the cover.