4 Assembly and installation [specialist]
14
99423x063MGK7-mub-en
–
V01
2018/06
Fig. 1
Fig. 2
Fig. 3
Fig. 4
1.
Remove the thermometer handles
(A-2, F-2) (see figure 1).
2.
Remove the insulating front shell of
the CoolBloC in the following order:
•
Remove the upper insulating element
of the thermometers.
•
Remove the insulating element
above the return pipe.
•
Remove the lower insulating element.
3.
Put the clips in the groove of the ball
valves (see figure 2).
For assembly on a wall bracket:
4.
Mount the wall bracket to the wall.
5.
To fix the plastic stop bolts, the notch
must point in the direction of the wall
bracket (see figure 3). Screw the stop
bolt on the thread of the wall bracket.
6.
Continue with point 9.
For assembly with stair bolts:
7.
Mount two stair bolts M8 with a
distance of 125 mm (see figure 4).
The stair bolts must stick out of
the wall by at least 65 mm.
8.
Screw the plastic stop bolt with the
groove pointing in the direction of
the wall on the stair bolts.
125 mm
65 mm