4 Assembly and installation [specialist]
16
99423x063MGK7-mub-en
–
V01
2018/06
4.2
Actuator
The PAW actuator for weather-compensated control is included in the scope of delivery.
For mixing valves with flow on the left, the scale must be turned by 180°.
for mixing valve with flow on the right
for mixing valve with flow on the left
4.3
Assembly of the actuator for CoolBloC with flow on the right:
1.
Turn the rotary knob of the mixing valve into
position 0. The nose at the rotary knob of
the mixing valve is thus in 9 o'clock position.
2.
Set the actuator to manual mode by turning
the selector switch.
3.
Turn the rotary knob of the actuator to the left to
the position shown on the adjacent figure (fig. 3).
4.
Put the actuator onto the rotary knob as shown
in figure 3 and push it on the anti-rotation
devices until the actuator snaps in.
5.
Set the actuator back to automatic mode.
Fig. 1
Fig. 2
Fig. 3
blue
blue
blue
red
red