Page 22
SETTING
GENERAL DATA
All functions of the DAT 11 are activated and modified by accessing a simple setup menu, shown on
the next page. All settings that are selected or activated remain in the memory even after the transmitter
has been switched off.
The DAT 11 is preconfigured with a default setting. The following pages shows the “Default” values of
each parameter.
With the first field installation some parameters have to be changed in order to obtain a correct indica-
tion of the displayed weight (Theoretical calibration).
This may be required when you first purchase the DAT11.
The settings of the setup menu can be changed using the keys on the front or the “OPTIMATION”utility
software provided.
KEY
FUNCTION WHILE MAIN MENU PROGRAMMING
J
It selects the next menu.
J
It selects the previous menu.
J
It exits the programming menu or returns to the upper level.
J
It accesses the relative sub-menu or programming or confirms the selected
parameter.
KEY
FUNCTION DURING SETTING OF THE NUMERICAL VALUES
J
It increases the value of the selected digit.
J
It decreases the value of the selected digit.
J
It selects the most-right digit.
J
It resets all the digits.
J
It ends composition and saves the value.
J
It exits without saving the changes.
Summary of Contents for DAT11
Page 2: ...Page II ...
Page 83: ...Page 81 ...
