manualshive.com logo in svg

Pavone Systems DAT 1400, Technical Manual, Page: 87 / 88

Share
Download
Pavone Systems DAT 1400 Technical Manual Download Page 87

Page 85

EU Declaration of conformity (DoC)

We

Pavone Sistemi

 S.r.l.

Via Tiberio Bianchi, 11/13/15 

20863 Concorezzo, MB

declare that the DoC issued under our sole responsibility and belongs to the following product:

Apparatus model/Product: 

DAT1400

Type:  

 

Weighing instrument

The object of the declaration described above used as indicated in the installation manual and use, is 

in conformity with the relevant Union harmonisation legislation:

Directive 

EMC 2014/30/EU

 Electromagnetic Compatibility

The following harmonized standards and technical specification have been applied:

EN 61000-6-2:2005
EN 61000-6-3:2007 + A1 2011
EN 61326-1: 2013

Directive 

LVD 2014/35/EU

 Low Voltage Directive

The following harmonized standards and technical specification have been applied:

EN 61010-1:2011

Directive 

EMC 2014/32/EU

 Measuring Instruments

The following harmonized standards and technical specification have been applied:

EN 45501:2015

Signed for end on behalf of:
Concorezzo: 15/07/2019
 

 

Di Reda Donato - Manager

Summary of Contents for DAT 1400

























































































Reviews:

No comments