28
All function buttons flashing rapidly?
The appliance could be overheated or have a fault. Switch the appliance off, remove
the mains plug and allow the appliance to cool down. After this, reinsert the mains
plug again and switch the appliance on. If the error message occurs again, please
contact our service centre.
Drinks not being prepared properly?
Check to ensure that the lever has been pressed down completely. If, despite this,
the error occurs again you should clean the appliance (see instructions p. 20/21:
Cleaning with a cleaning capsule or p.22/23: Cleaning with cleaning fluid) and also
descale it (see instructions p. 24/25).
If the water runs out during drinks output: Interrupt drinks preparation by pressing
any button. Open and close the lever to eject the capsule, remove the water tank,
refill it with fresh water and insert it in the appliance again. Place collecting
container under the spout and rinse the appliance out until water flows out of the
drinks spout.
Drink dispensing is delayed?
The appliance is heating up.
Liquid capacity during drinks preparation is insufficient?
The system could be calcified. Descale the appliance in accordance with the in-
structions on p. 24/25. If the problem continues to occur, please check the cup
filling capacity you have programmed. If required, reset the appliance to the factory
settings (see instructions p.17) and then re-programme your individually required
cup filling capacity (see instructions p. 16).
SAFETY INFORMATION
The appliance only functions correctly
with drink capsules of any brand which are
labelled with the K-fee® - your system logo.
Use of non-original capsules can result in the fol-
lowing risks: health risks, damage to the appliance
and possible loss of warranty claims.
Frequently asked questions