21
5
Now leave the cleaning agent 2 minu-
tes to activate. Start the cleaning process
by pressing the "Large cup" button (mi-
nimum quantity 100 - 200 ml). The clea-
ning fluid may turn slightly green during
the cleaning process.
6
Open the lever, activate capsule
ejection, close the lever and empty the
collecting container. Replace the empty
collecting container under the spout
again.
7
Now press the "Large cup" button
again to rinse the appliance out with fresh
water (do not insert a capsule!). Repeat
this process until the water dispensing
from the spout is clear.
8
To complete, remove the collecting
container and the water tank, empty
them and clean in hot water. Then fill the
water tank with fresh water and replace it
in the appliance with the drip tray.
NOTE
Your programmed cup
filling capacity may not be
less than the necessary quan-
tities for steps 4 and 5.
WARNING
Very hot water –
scalding hazard.
PROHIBITED
Do not drink the cleaning
fluid –
health hazard.
6
4
5
7
English