8
SmartNode 10100A Series Quick Start Guide
7.1 Connecting the console serial port
1.
Connect a CAT5 RJ-45 (male-male) cable (supplied with unit) between the COM
port of your computer and the serial port (labeled CONSOLE) of the SN10100A.
2.
If your computer’s serial port features a DB9 connector, use the DB9 to RJ-45
adapter supplied with your SN10100A. If your computer's serial port features a
USB connector, you will need to provide a USB to DB9 adapter.
Figure 7.
Connecting the console serial port
7.2 Connecting the Ethernet management interface
1.
Connect the supplied CAT5 Ethernet cable to the management port labeled
MGMT0 on the rear of the SmartNode 10100A (see
figure 8
on page 8.
2.
Log into the SmartNode using the specific credentials included on the “Important
Notice” sheet that shipped with your unit. The management port is configured
with a static Class C IP address by default
.
Figure 8.
Connecting the management interface
S
e
r
ial Te
r
mi
n
al (PC)
Note
A Patto
n
Model 16F-561 RJ45 to DB-9 adapte
r
i
s
i
n
cl
u
ded with each
S
ma
r
tNode 10200A device.
CON
S
OLE Po
r
t
15
14
13
12
10 11
8
9
3
2
0
7
6
5
4
1
MGMT0
MGMT1
ETH0
ETH1
VOIP0
VOIP1
Ethe
rn
et Ma
n
ageme
n
t
Po
r
t (MGMT0)
