CopperLink 1300 Quick Start Guide
15
Figure 15.
Basic Setup
User Access: (optional configuration)
Users may change the password for the admin
user.
•
Management IP Setup:
-
Static
: Create your own IP address, netmask and gateway (optional–the gateway
is required for remote management).
-
DHCP
: The CL1314 management port will accept an IP address from a DHCP
server.
-
Both
: This choice will assign two IP addresses (one static and one DHCP to the
management port
-
Management VLAN ID
: (Optional) define a VLAN ID for management traffic.
•
Line Setup
: This where you can manually set your CopperLink line options.
Note
The CopperLink Ethernet Extenders by default are set to plug-and-play opera-
tion.
-
Line Type (Local or Remote)
: This will set the Ethernet Extender as Local or
Remote. Local is typically used at the network, Remote is typically used at the
remote device or remote network. Your CopperLink 1300 when received in a 2pk
is already configured one CL1300 as Local and one CL1300 as Remote.