SmartNode 4400 Series detailed description
20
SmartNode 4400 Series Getting Started Guide
1 • General information
Reset button behavior
For those SmartNode devices that have a
Reset
button on the rear panel, its behavior is as follows:
•
To restart the unit with the current startup configuration—Press for less than 1 second and release the
Reset
button. The SmartNode will restart with the current startup configuration.
•
To restart the unit with factory default configuration—Press the
Reset
button for 5 seconds until the Power
LED starts blinking. The unit will restart with factory default configuration.
•
To restart the unit in bootloader mode (to be used only by trained SmartNode technicians)—Start with the
unit powered off. Press and hold the
Reset
button while applying power to the unit. Release the
Reset
button
when the
Power
LED starts blinking so the unit will enter bootloader mode.
Summary of Contents for SmartNode 4400
Page 7: ...7 SmartNode 4400 Series Getting Started Guide Table of Contents Introduction 71...
Page 63: ...63 Appendix D Factory Configuration Chapter contents Introduction 63...
Page 68: ...68 Appendix F Installation checklist Chapter contents Introduction 68...
Page 70: ...70 Appendix G Accessories Chapter contents Introduction 70...