![background image](http://html2.mh-extra.com/html/patton-electronics/smartnode-4400/smartnode-4400_getting-started-manual_4041791037.webp)
1. Configure IP address
37
SmartNode 4400 Series Getting Started Guide
4 • Getting started with the SmartNode 4400 Series
3. Loading the configuration
(see
figure 16
). Refer to section
“2. Connecting the SmartNode to the net-
work”
on page 40 for details.
Figure 16. Loading the configuration
Note
You can manually configure the SmartNode. You do not have to load
a configuration file.
Note
The SmartNode CD-ROM contains a collection of third party soft-
ware tools (including TFTP servers and Telnet utilities) to help you
configure, operate and monitor the SmartNode device.
1. Configure IP address
Factory-default IP settings
Both Ethernet interfaces are activated upon power-up. The LAN interface ETH 0/1 (LAN) provides a default
DHCP server. The factory default configuration for the Ethernet interface IP addresses and network masks are
listed in
table 7
. Both Ethernet interfaces are activated upon power-up. LAN interface ETH 0/1 (LAN) pro-
vides a default DHCP server.
If these addresses match with those of your network, go to section
“2. Connecting the SmartNode to the net-
work”
on page 40. Otherwise, refer to the following sections to change the addresses and network masks.
Table 7. Factory default IP address and network mask configuration
IP Address
Network Mask
WAN interface Ethernet 0 (ETH 0/0)
DHCP
DHCP
LAN interface Ethernet 1 (ETH 0/1)
192.168.1.1
255.255.255.0(/24)
DHCP IP address range
192.168.1.10 - 192.168.1.19
255.255.255.0(/24)
100-240V
(50-60 Hz)
1 AMP
UNIT EQ
UIPPED WI
TH DU
AL SUPPLIES
DIS
CONNECT BO
TH SUPPLIES
BEFORE SER
VIC
ING
ETH 0/0
Console
Telco P
or
ts
50
Reset
ETH 0/1
2. Modify the configuration as needed
3. Load configuration onto the SmartNode
1. Download configuration example from the CD-ROM
included with your SmartNode device or from the
Patton Web server at www.patton.com/voip
LAN (ETH 0/1)
LAN
Internet or
WAN (optional)
WAN
(ETH 0/0)
Summary of Contents for SmartNode 4400
Page 7: ...7 SmartNode 4400 Series Getting Started Guide Table of Contents Introduction 71...
Page 63: ...63 Appendix D Factory Configuration Chapter contents Introduction 63...
Page 68: ...68 Appendix F Installation checklist Chapter contents Introduction 68...
Page 70: ...70 Appendix G Accessories Chapter contents Introduction 70...