Slot Configuration page MIB variables description
186
Model 1001MC Operations Guide
8 • Model 2707RC management
Remote User Id (remoteUserID)
This feature is not supported by the Model 2707RC NTU.
Local Circuit ID (localCircuitID)
The circuit ID is a 40-byte string that is stored in non-volatile flash within the Model 1001MC.
Remote Circuit ID (remoteCircuitID)
The circuit ID is a 40-byte string that is stored in non-volatile flash within the Model 1001MC.
Alarm Information
Clear Slot Alarms (resetStatus)
Selecting this push button erases the alarms (errors and warning) associated with the specified slot.
Note
The errors and warning will still be listed in the System Log.
Hardware Reset (resetStatus)
Selecting this push button will force the associated modem to perform a hardware reset.
Card Lost Indication (cardLostIndication)
This variable allows you to choose what type of indication will be made if a modem is removed from the man-
agement system. Three choices are available:
•
Error(2)
•
Warning(1)
•
None(0)
Line Down Indication (lineDownIndication)
This variable allows you to choose what type of indication will be made if a modem reports a line down sce-
nario. Three choices are available:
•
Error(2)
•
Warning(1)
•
None(0)
Note
Line Down Indication
must be set to
error(2)
line up and line down
SNMP trap messages to be sent.