Configuration and management
136
Model 1001MC Operations Guide
7 • Model 2701RC management
Figure 69. Web page navigation to Model 2701RC Configuration Slot page
Making configuration changes to your 2701RC NetLink NTU
Do use the following to make configuration changes to your NetLink NTU.
Note
You must be logged in as superuser to perform the following procedure.
1.
With the
Model 2701 Configuration Slot
page displayed, change the
Input Mode
(see
figure 68
) to
super-
VisoryMode
. The
Modify Configuration
hyperlink will appear.
2.
Click on the
Modify Configuration
hyperlink to display the
Model 2701RC Configuration
page.
3.
Make your configuration changes or select the
Set Default Con
fi
guration
button.
4.
Select the
Submit Query
button to place the changes into the 1001MC’s temporary memory. If you decide
that you do not want your changes implemented, you can select the
Clear Changes
button.
5.
Select the
Back
hyperlink to return to the
Model 2701 Configuration Slot
page.
6.
Change the Input Mode back to
onLine
and select the
Submit Query
button. When the unit returns to the
online state, the 2701RC will begin implementing the configuration changes.
Note
The variables that you changed are now highlighted in yellow. After the
2701RC processes the new information, the highlighting will be
removed.
For more information about items on the
Model 2701 Configuration Slot
page, see
“Model 2701RC Config-
uration Slot X page MIB variables description”
on page 143.