Bridged PPP configuration
54
Model 6081RC Network Access Server Getting Started Guide
6 • PPP configuration
2. Click on one of the hyperlinks in the Channel Column to display the PPP Options page for the selected
channel. The PPP Options page lists the H.110 channel connections previously defined during H.110
channel configuration. This page provides several buttons for navigating through stored channel configura-
tion:
– The
Refresh Page
button forces the 6081RC to display changes made since the previous refresh cycle
– The
First Port
button displays the configuration for the first port in the H.110 Channel Configuration
page listing of channels (see
figure 28
).
– The
Previous Port
button displays the configuration for the port previous to the one currently displayed
– The
Next Port
button displays the configuration for the port following the one currently displayed
– The
Last Port
button displays the configuration for the last port in the H.110 Channel Configuration
page listing of channels (see
figure 28
)
– The
Reset
button cancels changes made to a port configuration.
– The
Submit
button saves changes made to a port configuration.
Figure 31. PPP Options page
3. Under the heading PPP Options, select one of the following network-control protocols (NCP) from the
Mode menu:
–
BCP
(bridge control protocol)
–
IPCP
(Internet protocol control protocol)
Note
Since this section is about configuring for bridged PPP, you would
select the BCP option.
