IP address configuration
42
Model 6081RC Network Access Server Getting Started Guide
4 • Configuring Ethernet ports
Figure 20. Interface Configuration page
IP address configuration
To add or change IP addresses for the Ethernet ports, do the following:
1. Click on the Interfaces link in the Configuration Menu pane (see
figure 17
on page 37) to display the Inter-
face Configuration page (see
figure 20
).
2. In the IP Address Configuration section of the Interface Configuration page, select the Ethernet interface
requiring IP address configuration from the Interface drop-down menu.
3. Type the new IP address into the IP Address text box.
4. Type the new netmask into the Netmask text box.
5. Click the
Configure
button.
