manualshive.com logo in svg

Patton electronics Access Server, Administrator'S Reference Manual

Introducing the Patton Electronics Access Server, a powerful tool designed for efficient network administration. Enhance your expertise with our comprehensive Administrator's Reference Manual, available for free download from manualshive.com. Access a wealth of valuable information, configuration guidelines, and troubleshooting tips, empowering you to maximize the potential of our cutting-edge product.

Share
Download
background image

Dial In User Statistics window

89

Access Server Administrators’ Reference Guide 

7 • Dial In

•

tacacs(5)—not currently implemented

•

edp(6)

•

ShivaPap(7)—not currently implemented

ACC Map (diStatLocalToPeerACCMap) 

The current value of the ACC Map used for sending packets from the local modem to the remote modem. The 
local modem sends this character map to the remote peer modem to ensure that the data being transferred is 
interpreted correctly. This setting becomes active when the link is in the up—able to pass packets—operational 
state (for more information, refer to “Operational Status (diIpOperStatus)” on page 90).

Peer-Local ACC Map (diStatPeerToLocalACCMap) 

The current value of the ACC Map used by the remote peer modem when transmitting packets to the local 
modem. The local modem sends this character map to the remote peer modem to ensure that the data being 
transferred is interpreted correctly. The remote peer modem combines its ACC Map with the map received 
from the local modem. This setting becomes active when the link is in the up—able to pass packets—opera-
tional state (for more information, refer to “Operational Status (diIpOperStatus)” on page 90).

Local-Remote PPP Protocol Comprsn (diStatLocalToRemoteProtComp) 

Indicates whether the local PPP entity will use protocol compression when transmitting packets to the remote 
PPP entity. This setting becomes active when the link is in the up—able to pass packets—operational state (for 
more information, refer to “Operational Status (diIpOperStatus)” on page 90). These are the available options:

•

disabled(0)—PPP compression is disabled

•

enabled(1)—PPP compression is enabled

Remote-Local PPP Protocol Comprsn (diStatRemoteToLocalProtComp) 

Indicates whether the remote PPP entity will use protocol compression when transmitting packets to the local 
PPP entity. This setting becomes active when the link is in the up—able to pass packets—operational state (for 
more information, refer to “Operational Status (diIpOperStatus)” on page 90). These are the available options:

•

disabled(0)—PPP compression is disabled

•

enabled(1)—PPP compression is enabled

Local-Remote AC Comprsn (diStatLocalToRemoteACComp) 

Indicates whether the local PPP entity will use address and control compression (ACC) when transmitting 
packets to the remote PPP entity. This setting becomes active when the link is in the up—able to pass pack-
ets—operational state (for more information, refer to “Operational Status (diIpOperStatus)” on page 90). 
These are the available options:

•

disabled(0)—ACC is disabled

•

enabled(1)—ACC is enabled

Remote-Local AC Comprsn (diStatRemoteToLocalACComp) 

Indicates whether the remote PPP entity will use address and control compression (ACC) when transmitting 
packets to the local PPP entity. This setting becomes active when the link is in the up—able to pass packets—

Summary of Contents for Access Server







































































































































































































































































Reviews:

No comments

Related manuals for Access Server

3Com OfficeConnect 3C19500 User Manual preview
OfficeConnect 3C19500
Brand: 3Com Pages: 52
IBM LS42 - BladeCenter - 7902 Service Manual preview
LS42 - BladeCenter - 7902
Brand: IBM Pages: 194
TYAN TN76-BP016 Service Manual preview
TN76-BP016
Brand: TYAN Pages: 109
SMC Sierra Monitor FS-8704-14 Driver Manual preview
FS-8704-14
Brand: SMC Sierra Monitor Pages: 42
IBM 87401RU Installation And User Manual preview
87401RU
Brand: IBM Pages: 110
IEI Technology AVL-2000PLUS User Manual preview
AVL-2000PLUS
Brand: IEI Technology Pages: 34
QNAP TS 73A Series User Manual preview
TS 73A Series
Brand: QNAP Pages: 68
Rasilient ApplianceStor 75 User Manual preview
ApplianceStor 75
Brand: Rasilient Pages: 24
HP ProLiant BL460c Gen8 User Manual preview
ProLiant BL460c Gen8
Brand: HP Pages: 84
Motorola AirDefence Installation Manual preview
AirDefence
Brand: Motorola Pages: 40
Motorola MVMS User Manual preview
MVMS
Brand: Motorola Pages: 90
QNAP TBS-464-8G Quick Installation Manual preview
TBS-464-8G
Brand: QNAP Pages: 16
Toshiba Strata Installation Manual preview
Strata
Brand: Toshiba Pages: 28
Toshiba RS-TX60 Viewer'S Manual preview
RS-TX60
Brand: Toshiba Pages: 204
Toshiba SD-H400 - Combination Progressive-Scan DVD Player Installation Manual preview
SD-H400 - Combination Progressive-Scan DVD Player
Brand: Toshiba Pages: 291
Lucidata Diplomat jr JRN-ASV User Manual preview
Diplomat jr JRN-ASV
Brand: Lucidata Pages: 32
GRASS VALLEY HDMA-4000SYNC Datasheet preview
HDMA-4000SYNC
Brand: GRASS VALLEY Pages: 2
Axis NPS 650 Quick Installation Manual preview
NPS 650
Brand: Axis Pages: 10

Brands by name

Popular brands

Load more brands