manualshive.com logo in svg

Patton electronics Access Server, Administrator'S Reference Manual

Introducing the Patton Electronics Access Server, a powerful tool designed for efficient network administration. Enhance your expertise with our comprehensive Administrator's Reference Manual, available for free download from manualshive.com. Access a wealth of valuable information, configuration guidelines, and troubleshooting tips, empowering you to maximize the potential of our cutting-edge product.

Share
Download
background image

10 • Digital Signal Processing (DSP)

Access Server Administrators’ Reference Guide

122

DSP information window

Successful Connects (dspSuccessfulConnects)

The number of calls that successfully connected.

Failed Connects (dspFailedConnects)

The number of calls that failed to complete the connection.

Local Halts (dspLocalHalts)

The number of times the modem is shutdown when it is incorrectly in the connected state.

MFR2 Starts (dspMfr2Starts)

The number of times the DSP starts MFR2 interregister signalling

MFR2 Stops (dspMfr2Stops)

The number of times the DSp stops doing MFR2 interegister signalling. This includes normal and abnormal 
termination of MFR2 interregister signalling.

Local Retrain Shutdowns (dspLocalRetrainShutdown)

The number of times a retrain can not be completed successfully. Retrain is aborted. 

Remote Retrains (dspRemoteRetrains)

The number of times the remote modem has asked for a retrain to be done. This is cumulative over all calls.

Remote Renegotiates (dspRemoteRenegotiates)

The number of times the remote modem has asked for a renegotiation to be done. This is cumulative over all 
calls.

Local Renegotiates (dspLocalRenegotiates)

The number of times the local DSP has requested a renegotiation to be done. This is cumulative over all calls.

Local Retrains (dspLocalRetrains)

The number of times the local DSP has requested a retrain to be done. This is cumulative over all calls.

Remote Offline (dspRemoteOffline)

The number of times the remote modem initiated a disconnection once the modulation was completed but 
before the call itself is completed. For example, before the PPP layer completed its initiation.

Small PPP (dspSmallPPP)

Number of PPP packets discarded because they were too small.

Non-7E Termination (dspNon7ETermination)

Number of PPP packets discarded because they did not terminate with the 7E flag character.

Bad Termination Bits (dspBadTerminationBits)

Number of PPP packets discarded due to bad termination bits.

Summary of Contents for Access Server







































































































































































































































































Reviews:

No comments

Related manuals for Access Server

SEH SEH650 Network Installation Manual preview
SEH650
Brand: SEH Pages: 5
IBM 88723RU User Manual preview
88723RU
Brand: IBM Pages: 106
IntesisBox Modbus Server-Cerberus ISO1745 Installation Manual preview
Modbus Server-Cerberus ISO1745
Brand: IntesisBox Pages: 5
360 Systems MAXX-1200-HD Operation Manual preview
MAXX-1200-HD
Brand: 360 Systems Pages: 148
QUANTA QSSC-S99K 2U User Manual preview
QSSC-S99K 2U
Brand: QUANTA Pages: 177
Moxa Technologies 2140 User Manual preview
2140
Brand: Moxa Technologies Pages: 100
Fujitsu Eternus DX80 S2 User Manual preview
Eternus DX80 S2
Brand: Fujitsu Pages: 186
Fujitsu ETERNUS DX60 User Manual preview
ETERNUS DX60
Brand: Fujitsu Pages: 242
Syncronorm V:Server U16 Instruction Manual preview
V:Server U16
Brand: Syncronorm Pages: 17
Cisco Aironet 1500 Series Datasheet preview
Aironet 1500 Series
Brand: Cisco Pages: 8
Cisco 7835-H2 - Media Convergence Server Datasheet preview
7835-H2 - Media Convergence Server
Brand: Cisco Pages: 8
Cisco APP1000 - One Application Server Appliance Installation And Administration Manual preview
APP1000 - One Application Server Appliance
Brand: Cisco Pages: 20
Cisco APIC L3 Installation And Service Manual preview
APIC L3
Brand: Cisco Pages: 130
Antrica ANT-35000A User Manual preview
ANT-35000A
Brand: Antrica Pages: 68
Koon Technology KNTD-100 Manual preview
KNTD-100
Brand: Koon Technology Pages: 20
CNET CNP-101U Hardware User'S Manual preview
CNP-101U
Brand: CNET Pages: 14
Promise Technology VTRAK M210i Product Manual preview
VTRAK M210i
Brand: Promise Technology Pages: 318
7th Sense VIOSO User Manual preview
VIOSO
Brand: 7th Sense Pages: 24

Brands by name

Popular brands

Load more brands