20 • System
Access Server Administrators’ Reference Guide
206
System—Modify window
Super User Password (boxSnmpMasterPassword)
This accesses the super user password for SNMP and HTTP (see figure 65 on page 205).
User Password (boxSnmpMonitorPassword)
This accesses the user monitoring password for SNMP and HTTP (see figure 65 on page 205).
LAN IP
This portion of the System—Modify window contains information described in the following sections.
Method to Obtain Address (boxIPAddressTechnique)
This indicates how to obtain the LAN IP address (see figure 65 on page 205). The following options are avail-
able:
•
disable(0)—Ethernet port is disabled (access server T1 to T1 usage only)
•
static(1)—LAN IP address is obtained from EIA-232 port and stored in Flash memory
•
rarp (2)—Reverse Address Resolution Protocol—A protocol defined in RFC 903 which provides the reverse
function of ARP. RARP maps a hardware address (MAC address) to an Internet address. It is used primarily
by diskless nodes, when they first initialize, to find their Internet address.
•
bootp(3)—The Bootstrap Protocol. A protocol described in RFCs 951 and 1084 and used for booting disk-
less workstations.
•
dhcp(4)—Dynamic Host Configuration Protocol—A protocol introduced by Microsoft on their NT server
with version 3.5 in late 1994. This protocol provides a means to dynamically allocate IP addresses to IBM
PCs running on a Microsoft Windows local area network. The system administrator assigns a range of IP
addresses to DHCP and each client PC on the LAN has its TCP/IP software configured to request an IP
address from the DHCP server. The request and grant process uses a lease concept with a controllable time
period. More information can be found in the Microsoft documentation on NT Server.
Address (boxIPAddress)
If the address technique above is static then this represents the LAN IP address.
Mask (boxIPMask)
If the address technique above is static then this represents the LAN IP mask.
Payable Features
This portion of the System—Modify window contains information described in the following section.
Enable Payable Features(boxFeatureEnableKey)
This encoded string is used to enable payable features.
Installation
This portion of the System—Modify window contains information described in the following section.
Summary of Contents for Access Server
