3 • Configuring the 3324 for operation
Model 3324 User Guide
30
Initial configuration through the RS-232 control port
-
The IP address of the default gateway
-
The 3324 VDSL port number to which each customer premises equipment (CPE) VDSL modem will be
connecting
-
The data rate at which each CPE VDSL will be operating
-
The final destination of the CPE's VDSL modem connection
Initial configuration through the RS-232 control port
Initially you must configure the 3324’s IP address and—in rare instances—change the netmask from the
default settings.
Note
Do not connect power or the Ethernet connection to the Model 3324
at this time.
Connecting the DB9-RJ45 adapter with the included cable
Do the following:
1. Connect the DB9-RJ45 adapter to your PC’s RS-232 serial port and 3324’s console port.
2. Connect the RJ45-RJ45 cable between the adapters which you installed in step 1 (see figure X on page
XX).
Setting up the HyperTerminal (or similar program) session
Do the following:
1. Open a HyperTerminal session by double-clicking on HYPERTRM.EXE.
]\
Figure 7. Connection Description window
Type a connection name (e.g., 3324 Config), select an icon, then click
OK
(see
figure 7
).
Summary of Contents for 3324
