background image

2.0  GENERAL INFORMATION

Thank you for your purchase of this Patton Electronics product.

This product has been thoroughly inspected and tested and is
warranted for One Year parts and labor.  If any questions or problems
arise during installation or use of this product, please do not hesitate to
contact Patton Electronics Technical Support at (301) 975-1007.

2.1  FEATURES

Converts parallel data to serial data or vice versa

Automatically selects parallel-to-serial or serial-to-parallel operation

Automatically selects DCE/DTE modes  

Serial data rates to 115,200 bps

No AC power required

Supports both software and hardware flow control

A five-state LED monitors status and diagnostics

External configuration switches

Ultra-miniature size

Made in the USA

2.2  DESCRIPTION

The Patton Model 2036 and 2037 Parallel to Serial Converter

automatically convert RS-232 serial data to parallel data format or vice
versa.  Incorporating advanced microprocessor technology, the Model
2036 and 2037 automatically sense and select parallel and serial
modes, as well as DCE/DTE modes.  Requiring no AC power, the
Model 2036 and 2037 support serial data rates to 115,200 kbps.

For easy configuration, the Model 2036 and 2037 feature a

convenient set of external configuration switches.  These accessible
configuration switches allow the user to control baud rate, parity, word
length and flow control.  An easy-to-read LED indicator displays status
and operating condition.

Housed in an ultra-miniature ABS plastic case, the Model 2036

comes equipped with a DB-25 female or male connector on the serial
side and a Centronics

36 pin male connector on the parallel side.

The Model 2037 is housed in the same convenient case and comes
equipped with a DB-25 female connector on the serial side and male 

or

female connector on the parallel side.

3

APPENDIX B

PATTON MODEL 2036 AND 2037 INTERFACE CONNECTIONS

36 PIN CENTRONICS PARALLEL PORT CONNECTIONS

Note:  All other pins are unconnected

10

Pin

Description

Direction

Serial to Parallel 

Parallel to Serial

1

Strobe

Output

Input

2

Data Bit 0

Output

Input

3

Data Bit 1

Output

Input

4

Data Bit 2

Output

Input

5

Data Bit 3

Output

Input

6

Data Bit 4

Output

Input

7

Data Bit 5

Output

Input

8

Data Bit 6

Output

Input

9

Data Bit 7

Output

Input

10

Acknowledge

Input

Output

11

Busy

Input

Output

12

Paper End

Input

Output

(to ground through resistor)

13

Select

Input

Output

14

To +5 through resistor

15

Error

Input

Output

16

To +5 through resistor

17

To +5 through resistpr

18
19
20
21
22
23
24

Ground

Pin Signal

Description

Connect to DTE 

Connect to DCE

Name

1

FG

Frame Ground

2

TD

Transmit Data

Input & Power Source

Output

RD

Receive Data

Output

Input & Power Source

4

RTS

Request to Send Input & Power Source

Output

5

CTS

Clear to Send

Output

Input & Power Source

6

DSR

Data Set Ready

Output

Input & Power Source

7

SG

Signal Ground

8

CD

Carrier Detect

Output

Input & Power Source

9

V+ 

External Power

Input for Power

Input for Power 

Source

20

DTR

Data Terminal

Input & Power Source

Output

Ready

Summary of Contents for 2036

















Reviews: