Pattfield Ergo Tools PE-BS 25, Instructions Manual

Page: 24 / 176

II - Technical data
Engine displacement …….………………………..…….……………..…….………..…25cm
3
Maximum engine performance............................................................................…0.8 kW
Mixture ratio………………………………………………………...……...……. petrol:oil: 40:1
Max. cutting width (brusher cutter)..........................................................................230mm
Dimension of the cutting blade……………………………...…..4 tooth, Ø230mm x 1.8 mm
Max. cutting width (grass trimmer............................................................................430mm
The diameter of the cutting line...................................................................................2mm
Idle speed............................................................................................................3000 /min
Max. engine speed............................................................................................10500 /min
Maximum rotational frequency of the spindle…………………...………………….8500 /min
Engine speed at recommended max. spindle rotational frequency...................10500 /min
Fuel consumption at max. engine performance…………………………………….0.38 kg/h
Specific fuel consumption at max. engine performance….…………..……....….447 g/kWh
Fuel tank capacity …………………………..........................................................…..500 ml
Net weight………………………….............................…........................…................ 6,5 kg
Measured sound pressure level ……............................................97.4 dB(A), K = 3 dB(A)
Measured sound power level …………………….…..................….108.6 dB(A), K=3 dB(A)
Guaranteed Sound Power Level …………..........................................................112 dB(A)
Vibration.........................................................................................4.472 m/s², K=1.5 m/s²
The declared vibration value has been measured in accordance with a standard test
method and may be used for comparing one tool with another. The declared vibration
value may also be used in a preliminary assessment of exposure.
WARNING! The vibration emission value during actual use of the tool can differ from the
declared value depending on the ways in which the tool is used. Identify safety measures
to protect the operator that are based on an estimation of exposure in the actual
conditions of use (taking account of all parts of the operating cycle such as the times
when the tool is switched off and when it is running idle in addition to the trigger time).
The sound intensity level for the operator may exceed 85dB(A) and ear protection
measures are necessary.