35 |
P a g e
Testing the barcode reader function
:
In order to test the barcode reader function, follow the procedure below.
1
. Find out what COM port number the barcode reader is on following the procedure above.
2
. Run the Honeywell "
EZConfig-Scanning
" software. There should be a shortcut on the desktop that looks
like this:
3
. On the bottom left of the "
EZConfig-Scanning
" software, you should see a picture of the scanner as well as
text in the Serial, Model, and Firmware Number fields.
4
. If you don't see any information written in the Serial, Model, and/or Firmware number fields, click the "
Port
Settings
" icon near the top of the window.
A window will appear as shown below. Verify that the COM port number matches what you noted in step 1. If
it does not, set the "
Port Number
" to the correct COM number and then click "
Config Comm
". After it is
complete, close the "
EZConfig-Scanning
" software and then restart it. Your scanner should now be
communicating with the software.
