13 |
P a g e
Using Your Own Windows Images
- Patrol PC recommends that you use the stock hard drive image provided for best performance.
- If you wish to perform a new Windows installation, the drivers and the RTi Control Panel must be installed
manually.
Installing the RT-12i Drivers
After a fresh Windows install, download the latest drivers from our website at www.patrolpc.com/ppc-
support/downloads, then install them in the following order:
1
. Chipset
2
. Graphics
3
. LAN Wired
4
. LAN Wireless (if the unit has this option)
5
. Touchscreen
6
. Audio
7
. GPS (if the unit has this option)
8
. Barcode Reader (if the unit has this option)
9
. Fingerprint Scanner (if the unit has this option)
10
. Intel Management (optional)
11
. HD Solid State (for units with solid state hard drives, optional)
Installing the RTi Control Panel
1
. Go to our website and download the latest RTi Control Panel at www.patrolpc.com/ppc-support/downloads.
2
. Double-click the downloaded file to install the RTi Control Panel.
3
. Choose the "
Typical Installation
".
4
. When the installation is complete, you may be prompted to update the BIOS or Embedded Controller.
Allow it to update.
- After the update is complete, the computer will shut down. The screen will flash, then fade to black. This
is normal during a BIOS or Embedded Controller update.
- After the screen fades to black, you can start the computer again. It will not fully boot the first few times.
Keep on turning the computer back on until it boots into Windows. Once it boots into Windows, you will be all
set.
