EN
Translation of original owner’s manual
81
■
STARTING ENGINE
Cold starting:
A “cold” start of the engine means starting it after at
least 10 minutes from when it was switched off or after refuelling.
1.
Untwist the fuel cap and oil cap thoroughly, but don’t remove
them from machine, just hang up them.
2.
Put
fuel and oil into the fuel tank and the oil tank to 80% of the
full capacity.
3.
Fasten two caps securely and wipe up any fuel spillage around
the unit.
4.
Continuously push the priming bulb until fuel comes in the
bulb.
(1) Fuel tank opening
(2) Oill tank opening
(3) Primer bulb
(4) Choke knob
5.
Turn the choke knob clockwise. The choke will close
and the
throttle trigger will then be set in the starting position.
When restarting immediately after stopping the engine set
choke in the open position.
6.
Push
the front handle guard down toward the front to activate
the chain brake.
7.
While holding the chain saw securely on the ground, Grip the
starter handle, slowly pull out the cord with your right hand
until you feel some resistance (the starter pawls grip), and now
quickly and powerfully pull the cord.
Never twist the starter
cord around your hand.
8.
When first firing occur, turn the choke knob counter
-
clockwise
to open the choke.
Note: setting the choke manually can temporarily
set the
throttle in a partially open position to aid starting.
6. Operation
NOTE
Summary of Contents for BP 41
Page 2: ......
