EN
Translation of original owner’s manual
75
6.
Always use caution when handling fuel. Wipe up all spills and then move the chain saw at
least ten
(10)
feet (three
(3) m) from the fueling point before starting the engine.
7.
Eliminate all sources of sparks or flame (e.g. smoking, open flames, or work that can cause
sparks) in the areas where fuel is mixed, poured, or
stored.
Do not smoke while handling fuel or while operating the chain saw.
8.
Do not allow other persons to be near the chain saw when starting the engine or cutting a
wood. Keep bystanders and animals out
of the work area. Children, pets, and bystanders
should be a minimum of 30feet (10m) away when you start or operate the chain saw.
9.
Never start cutting until you have a clear work area, secure footing, and planned retreat
path from the falling tree.
10.
Always
hold the chain saw firmly with both hands when the engine is running. Use a firm
grip with thumb and fingers encircling the chain saw handles.
11.
Keep all parts of your body away from the saw chain when the engine is running. Before you
start the engine, make sure the saw chain is not contacting anything.
12.
Always carry the chain saw with the engine stopped, the guide bar and saw chain to the rear,
and the muffler away from your body.
13.
Always inspect the chain saw before each use for worn, loose, or changed parts. Never
operate a chain saw that is damaged, improperly adjusted, or is not completely and securely
assembled. Be sure that the saw chain stops moving when the throttle control trigger is
released.
14.
All chain saw service, other than the items listed in the
Operator’s Manual, should be
performed by maintenance service
centre
of manufacturer or importer (e.g., if improper
tools are used to remove the flywheel, or if an improper tool is used to hold the flywheel in
order to remove the clutch, structural damage
to the flywheel could occur which could
subsequently
cause the flywheel to disintegrate).
15.
Always shut off the engine before setting it down.
3. For safe operation
Summary of Contents for BP 41
Page 2: ......