background image

2

This PATRIOT ANTENNA equipment is warranted to be free from defects in material and workmanship un-

der normal use and service. PATRIOT ANTENNA shall repair or replace defective equipment, at no charge, 

or at its option, refund the purchase price, if the equipment is returned to PATRIOT ANTENNA not more than 

twelve (12) months after shipment. Removal or reinstallation of equipment and its transportation shall not be 

at cost of    PATRIOT ANTENNA except  PATRIOT ANTENNA shall return repaired or replaced equipment 

freight prepaid.

This Warranty shall not apply to equipment which has been repaired or altered in any way so as to affect 

its stability or durability, or which has been subject to misuse, negligence or accident. This Warranty does 

not cover equipment which has been impaired by severe weather conditions such as excessive wind, ice, 

storms, lightning, or other natural occurrences over which PATRIOT ANTENNA has no control, and this War-

ranty shall not apply to equipment which has been operated or installed other than in accordance with the 

instructions furnished by PATRIOT ANTENNA.

Claimants under this Warranty shall present their claims along with the defective equipment to PATRIOT 

ANTENNA immediately upon failure. Noncompliance with any part of this claim procedure may invalidate 

this warranty in whole or in part.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER AGREEMENTS AND WARRANTIES, ANY 

IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE IS LIMITED 

IN DURATION TO THE DURATION OF THIS WARRANTY. PATRIOT ANTENNA DOES NOT AUTHORIZE 

ANY PERSON TO ASSUME  FOR IT THE OBLIGATIONS CONTAINED IN THIS WARRANTY AND PATRI-

OT ANTENNA NEITHER ASSUMES NOR AUTHORIZES ANY REPRESENTATIVE OR OTHER PERSON 

TO ASSUME FOR IT ANY OTHER LIABILITY IN CONNECTION WITH THE EQUIPMENT DELIVERED OR 

PROVIDED.

IN NO EVENT SHALL PATRIOT ANTENNA BE LIABLE FOR ANY LOSS OF PROFITS, LOSS OF USE, IN-

TERRUPTION OF BUSINESS, OR INDIRECT, SPECIAL OR CONSEQUENTIAL DAMAGES OF ANY KIND.

In no event shall PATRIOT ANTENNA  be liable for damages in an amount greater than the purchase price 

of the equipment.

Some states do not allow limitations on how long an implied warranty lasts, or allow the exclusion or limita-

tion of incidental or consequential damages, so the above limitations or exclusions may not apply to you.

PATRIOT ANTENNA has the right to void the warranty when the antenna is installed by someone other then 

a certified installer.

LIMITED TWELVE (12) MONTH WARRANTY

Product Serial Number-  _________________

Date Purchased- ____________                                                                 

 Patriot Antenna Systems

704 North Clark Street

Albion, MI 49224 USA

 Tel:   (517)629-5990

Fax:   (517)629-6690

   E-mail:  [email protected]

Summary of Contents for 2.4m Offset Antenna





















Reviews: