12
9
B-Right
A-Right
2. Set a panel “A-Right” in place next to panel “B-Right” and fasten with
hardware as in Step 1 leaving bolts 1/2 turn loose..
Panel Assembly (cont.)
3. Continue repeating step 2 for the remaining panels.
4. When all panels and hardware is in place tighten
all panel and support angle bolts starting near the hub
and working outward.
NOTE: When working on the panels of the reflector
your wieght can only be placed on the Radial Beam s
where the rows of bolts are being tightened!
224102
224101
Summary of Contents for 2.4m Offset Antenna
Page 1: ...2 4m Offset Antenna Receive only and Transmit Receive...
Page 19: ......
