Paton ProTIG-200, User Manual

Page: 48 / 51

- 47 -
PATON ProTIG DC TIG/MMA
Max. consumed power, kWA 6.3 13.5
Rated operating voltage, V:
-
ММА
- TIG AC/DC
20.4 – 26,8
10.4 – 18
24 – 32
12 - 18
11. DELIVERY SET
8. Argon-arc inverter with mains cable – 1 pcs.;
9. Argon-arc torch ABITIG with air ( for ProTIG-200 AC/DC ) or liquid ( for ProTIG-315-
400V AC/DC ) cooling, 4 m – 1 pcs.;
10. Welding cable with the terminal « mass » ABICOR BINZEL, 3m – 1 pc.;
11. Operation manual – 1 pc.;
12. Belt for carrying on the shoulder (for ProTIG-200 AC/DC) – 1 pc.;
13. Corporate corrugated box PATON – 1 pc.;
14. Quick-replaceable pneumatic socket, 8 mm – 1 pc.
12. SAFETY RULES
GENERAL REGULATIONS
The welding machine is produced in accordance with technical standards and established
safety rules. However, in case of improper handling, there is a danger of:
- injury to the staff personnel or a third person;
- causing damage to the machine or material values of the enterprise;
- violation of the effective workflow.
All persons related to putting into operation, control, care and maintenance of the machine
should:
- pass appropriate certification;
- have knowledge of welding;
- keep exactly with this instruction.
Malfunctions that can reduce safety should be eliminated urgently.
USER'S DUTIES
The user undertakes to admit to work in the welding machine only those persons, who:
- got acquainted with the basic safety rules, have been trained in the use of welding
equipment;
- read the section "Safety Rules" and instructions on the necessary precautionary
measures given in this manual and confirmed it with their signature.
PERSONAL PROTECTIVE EQUIPMENT
For personal protection, the persons related to putting into operation, control, care and
maintenance of the machine should:
- wear strong shoes that retain insulating properties, including in wet conditions;
- protect hands with insulating gloves;