Paton ProTIG-200, User Manual

Page: 30 / 51

- 29 -
PATON ProTIG DC TIG/MMA
2. SPECIFICATION
Basic characteristics ProTIG-200 ProTIG-315-400V
1. Electric power 50/60Hz, V 230 (190-260) 380 (+/-10%)
2. Welding current 5 - 200 А 10 - 315 А
3. Basic operation mode TIG АС/DC TIG АС/DC
4. Additional operation modes ММА, SPOT ММА, SPOT
4.1 Interface languages UA, ENG, RUS UA, ENG, RUS
5. Protection rate IP23 IP23
6. Efficiency not less than 80% not less than 80%
7. Maximum supply power, kW 6.3 13.5
8. ММА mode , А 10 - 200 10 – 315
9. TIG АС/DC mode , А 5 - 200 10 – 315
10. Idling voltage, V 60 - 80 80
Load duration
11. 100% (DC) 126 А 180 А
12. 40% (DC) 200 А 315 А
13. 100% (АC) 140 А 200 А
14. 50% (АC) 200 А 315 А
General parameters
15. Contactless arc ignition + +
16. Welding current indication + +
17. Memorizing modes 10 programs 10 programs
18. Arc burning stabilization + +
19. Pulse function in TIG AC/DC, MMA, SPOT + +
20. TIG Lift function + +
21. Double Pulse function + +
22. Button mode on the torch , TIG АС/DC 2Т, 4Т 2Т, 4Т
22.1 Ability of pedal connection + +
22.2 Remote Control function in TIG АС/DC + +
Cyclogram parameters in TIG AC/DC modes
23. Shielding gas supply time before welding, s 0.1 - 25 0.1 - 25
24. Regulation of starting current , А 5 - 185 10 - 300
25. Regulation of current rise time, s 0 - 15 0 - 15
26. Regulation of downslope time, s 0 - 25 0 - 25
27. Regulation of end current , А 5 - 185 10 - 300
28. Shielding gas supply time after welding, s 0.1 - 25 0.1 - 25
29. AC frequency, Hz 15 - 200 15-70
30. Polarity balance in AC welding, % 15 - 90% 15 - 90%