Paton ProTIG-200, User Manual

Page: 28 / 51

- 27 -
PATON ProTIG DC TIG/MMA
ENGLISH
CONTENT
1. GENERAL PROVISIONS 28
2. SPECIFICATION 28
3. SYMBOLS OF CONTROL ELEMENTS, ADJUSTMENT OF MACHINE 30
3.1 Symbols of all welding modes parameters 33
3.2 Reset the machine to factory settings 33
3.3 Choosing the interface language 34
4. MANUAL ARC WELDING WITH A NON-CONSUMABLE ELECTRODE
IN THE INERT GASES ENVIRONMENT (TIG AC/DC) 34
4.1 Cyclogram of TIG AC welding 35
4.2 Cyclogram of TIG DC welding 38
4.3 TIG Lift function of arc ignition 41
4.4 Double Pulse function 41
4.5 SPOT welding mode 41
4.6 TIG MIX welding mode 42
4.7 Operation of the machine with the use of pedal in TIG AC and TIG DC
modes 42
4.8 Function of remote control of welding current 43
5. MANUAL ARC WELDING USING COATED ELECTRODE (MMA) 43
5.1 Cyclogram of ММА welding mode using coated electrode 44
5.2 Function of AC welding using coated electrode ММА АС 45
6. PUTTING INTO OPERATION 45
6.1 Using according to the purpose 45
6.2 Requirement for placement 45
6.3 Connection to the mains 45
6.4 Connection of the network plug 45
7. CARE AND MAINTENANCE 46
8. STORAGE RULES 46
9. TRANSPORTATION 46
10. TECHNICAL DATA 46
11. DELIVERY SET 47
12. SAFETY RULES 47
13. WARRANTY OBLIGATIONS 49