January 2021
60
Pathport® QUATTRO - 63XX - Manual
PORT STATUS AND CONFIGURATION MENU
Port Status may be reviewed by turning the encoder knob to reach the desired port, from the main screen showing the device
name and IP address. The LCD shows the following information.
<Gateway Name>
IP: 10.30.146.58/8
ETH: Link Up
<Port Name>
Port <x>: Universe 1
Status: Active Output
The Port’s soft label, configurable in Pathscape, is shown on the top line. By default, the label is the Port number.
Below that, the Port number and patch is shown.
If the Port is configured as an
Input
, it will show:
• Port <x>: Universe #
: The Network DMX Universe the Port is set to transmit to
If the Port is configured as an
Output
, it will show:
• Port <x>: Universe #
: The DMX512 Universe the Port is set to output to, if assigned a Standard Universe, or
• Port <x>: Patch Name
: The name of the Custom Patch assigned to this Port, if applicable.
The bottom line shows the Port Status. It will show:
• Status: Active Input/Output
: The Port is currently receiving DMX512 (if set to Input) or transmitting DMX512 (if set to
Output).
• Status: Inactive Input/Output
: The Port is not currently receiving DMX512 (if set to Input) or not currently transmitting
DMX512 (if set to Output), however the Port is still enabled.
• Status: Disabled Input/Output
: The Port is currently disabled.
From the Port Status screen of the desired Port, push the button. The Port Configuration menu will be shown.
Port <x> Configuration
DMX Port: Enabled
Port Direction: DMX Output
Patch: Universe 1
DMX Speed: Maximum (44pps)
RDM: Enabled
CCI Action: DMX Hold
<Back>
Summary of Contents for Pathport QUATTRO 63 Series
Page 7: ......
