January 2021
54
Pathport® QUATTRO - 63XX - Manual
MENUS
NETWORK SETUP
Network Setup
IP Mode: Static
IP Address: 10.30.142.169
Subnet Mask: 255.0.0.0
Gateway: 10.0.0.1
<Back>
This menu allows review and changes to the device IP mode, IP address, subnet mask, and default gateway. Scroll the
encoder knob to highlight the property you want to edit, and push the knob to edit the value. Scroll the knob again to choose
the new value, and push the knob to confirm.
Depending on the item you are editing, you may have to scroll down to select the
<Back>
option to return to the previous
menu, or select
Save and Apply
to confirm. In some menus you may also select
Discard Changes
to return to the previous
menu without committing changes.
Menu Item
Description
IP Mode
Determines how the device’s IP settings will be obtained.
Static (default)
: IP Settings manually set by user.
Dynamic
: IP Settings will be obtained from a DHCP server.
<Back>
: Return to previous menu
IP Address
Manually sets IP address (IPv4).
Turn encoder to set each octet. Push to accept and move to next octet. Illegal values
are not accepted.
Subnet Mask
Set subnet mask for the device. Only valid masks are shown.
Turn knob to select from list of valid masks.
Gateway
Set default gateway for the device. Only valid gateways are accepted.
Turn knob to set each octet. Push to accept. You will only be able to edit the octets
appropriate based on your Subnet Mask. Gateways will need to be set for access to
the Internet for SixEye Cloud Management.
<Back>
Return to previous menu.
NOTE
: When IP Mode is set to “Dynamic”, it is still possible to manually adjust the IP settings. This practice is not
recommended as the changes will not stick.
Summary of Contents for Pathport QUATTRO 63 Series
Page 7: ......
