Aiming The PST900/XS Light Engine
The PST900/XS must be aimed in Azimuth and Elevation precisely in accordance with the
appropriate site lighting plan specifications. Azimuth values are set using a suitable
protractor to establish the desired relative angle between the pole zero reference and the
luminaire reference(Meausured from any longitudinal mounting trunnion face).
Elevation values are set using the onboard inclinometer.
The luminaire may also be aimed visually by gunsight alignment of two external features on
the heat sink body
Luminaire orientation with
0
inclinometer set to 0
Elevation Adjustment
Inclinometer
Azimuth Reference
Face
PLED18-900-8
90
,0
0°
Torque trunnion Nuts to 107Nm.
Luminaire utilises low sail area with
a multi friction surface mounting
trunnion and has been designed to
AS/NZS60598.2.5:2002 Region C,
Terrain Category 2 Wind Loading,
for wind speeds up to 250Km/H at
a mounting height of 30m.
Original sighting parameters will be
maintained negating the
requirement for re-aiming to
original lighting design in the event
of such an occurrence.
Index Notch
2020 Pled Australia Pty Ltd. All rights reserved. For informational purposes only
PATHFINDER
LED
Lighting the way
