Data Display
© 1996-2001 by PAT GmbH
∙
D-76275 Ettlingen
∙
Hertzstr. 32 - 34
∙
++49 (0) 7243 709-0
∙
FAX ++49 (0) 7243 709-141
18
19_1272E.DOC / 2001-04-02 / Rev. C / ko.
N
Text Display / Tele Percentage Display
Depending on the program version, additional information are dis-
played in this field, e.g. the identification number for the geometry
data according to crane symbol
E
.
In versions with
tele percentage display,
the telescoping lengths
of the telescopes are displayed in the format: Tele 1 \ Tele 2 \ Tele
3 (+4) (in %)
If required, the following information are displayed:
·
"SYSTST" during test mode
·
"SYSERR" together with "E93" in error code display
M
·
"CU-ERR"
together with "E94" in error code display
M
P
Symbol "On Outriggers"
This symbol is displayed when outriggers are required in the op-
erating mode adjusted.
R
Symbol "On Rubber"
This symbol is displayed when "free, on rubber" is required in the
operating mode adjusted.
S
Indicator Radius / Angle Program
Depending on the load chart, the cutoff in case of overload is car-
ried out via the radius or the boom angle. This indicator shows an
angle with arrow in angle-related programmings. At radius related
programming an angle with radius dimensioning is displayed.
