Control Identification
© 1996-2001 by PAT GmbH
∙
D-76275 Ettlingen
∙
Hertzstr. 32 - 34
∙
++49 (0) 7243 709-0
∙
FAX ++49 (0) 7243 709-141
10
19_1272E.DOC / 2001-04-02 / Rev. C / ko.
(6)
Button "Operating Mode"
The
button „Operating mode"
(6) is actuated if a new operating
mode code (e.g. upon modification of the operating state) is to be
entered.
The button
"Operating mode"
lights up upon actuation, thus indi-
cating that the function "
Input of an operating mode code"
has
been activated. At the same time, the
A2B switch pilot lamp
(2)
and the
overload pilot lamp
(4) light up and the crane movements
are interrupted.
WARNING
The correct setting of the Operating Code Switch is of utmost importance for the proper
function of the system and the crane. Therefore, only crane operators who are thoroughly
familiar with crane load capacity charts and the use and operation of the system shall set
the Operating Code Switch.
·
The procedure on how to enter an operating mode code is described in chapter 4.1.
