![background image](http://html1.mh-extra.com/html/passtech/pt400b/pt400b_user-manual_3902596016.webp)
Version 1.1
- 16 -
Thank you for choosing PT400B RFID/Keypad locks.
IF you have any questions, please contact your
local distributor or our technical support.
FCC Statement
15.19: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This
device may not cause harmful interference, and (2) This device must accept any interference received, including
interference that may cause undesired operation.
5.21: Note: The grantee is not responsible for any changes or modifications not expressly approved by the party
responsible for compliance. Such modifications could void the user’s authority to operate the equipment.
15.105(b): Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Disclaimers
The manufacturer, importer, and distributor shall not be liable for damages including accidental and personal injury due
to the improper use or operation of this product.
The information in this
user manual was written based on current product specifications.
The manufacturer, iriver Limited, is adding new complementary features and will continue to apply new technologies in
the future.
Product specifications may be changed without prior notice.
iriver is not responsible for data loss due to product use.
Exposure statement
The transmitter must not be co-located or operated in conjunction with any other antenna or transmitter. This equipment
complies with the FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be
installed and operated with a minimum distance of 20
cm between the radiator and any part of your body.