Version 1.1
- 11 -
☞
In free selection mode, lock and card needs to read and write the each
other’s information. So please do not sway the card until the latch is moved.
4.3.2 Assigned Mode (Permanent Use)
The initial status of the lock in Assigned Mode is closed status (bolt out)
①
Press on the front body of the lock.
②
Put the User Card to the front body of the assigned lock.
③
Lock checks the card, and green LED lights and beep sound once. Then, lock
will be opened, and closed again in 5 seconds.
④
To close the locker, just close the door. Lock will remain the closed status.
4.3.3 Replacing old User card with New User card
(1) Free Selection
①
Issue new user card by LOS (Locker Operation System) program.
②
In case the locker is closed, put Master Card to the lock to open the lock.
③
Put new User card to the lock, then lock will accept new User card, and missing
card will not be accepted.
④
In case the locker is opened, just put the new user card to the lock, and the
lock will register this locker number. Old User key will not be accepted.
(2) Assigned Mode
①
Issue new User card (with assigned locker Number) for Assigned mode.
②
Put Master Card to the lock to delete the old user card, and put the new User
card to the lock.
③
Lock will accept the new user card only, and old user card registration will be
deleted.
④
In case the lock is set for multiple users, lock revision should be updated when
new user card is issued by LOS program. Then, Lock updates it
’s revision
number when new user card is scanned. The other user cards which are
assigned to this locker also needs to be reissued with updated lock revision by
LOS program.
