background image

Version 1.1                             

 

-  10  -

 

 

Put the Maintenance card to the locks, then, new Master cards will be 

registered to the lock, and lost master card will be blocked.   

 

(2) Using Owner Card   

 

Delete the old master card registrations in the lock (refer to the 4.1) with 

Owner Card. 

 

Put new master cards to each lock so as to register new master cards. 

Then, old master card you lost will not be used. 

 

  All existing Master cards needs to be registered again together with new 

Master card because all master card registrations were deleted if Owner card 
is used.

 

 

4.3    User Card 

 

4.3.1    Free Selection (Shared Use) 

 

The initial status of the lock in Free Selection mode is open (Latch is inside). 

 

(1) Initial Use     

  Select the empty locker. 

  Put your belongings in the locker. 

  Press            on the front body of the lock to wake up the lock, and place your 

card (or any form of user key) to the front body of the lock. 

  Wait until the Green LED lights and Beep sounds once. 

  Bolt will move out, and lock is closed.   

  Close the door, and the lock will be remained at locking state. 

 

(2) Open the lock   

  Press            on the front body of the lock. 

  Put close your card to the front body of the lock. 

  Lock will check the lock ID and key of the user card (or any form of user key). 

  Lock will emit Green LED and beep sound once it is right user card . 

  Bolt will be moved and locker will open. 

  User information will be erased from the lock so that new user can use the 

empty lock. 

Summary of Contents for PT400B

















Reviews: