Paslode C10060, Operating Instructions Manual, Page: 4 / 12

1-4
：
RISK OF BURNS
●
HOT SURFACE CAN CAUSE SERIOUS INJURY. NEVER TOUCH ANY EXPOSED
METAL PARTS ON COMPRESSOR DURING OR IMMEDIATELY AFTER OPERATION.
TOUCHING THESE AREAS MAY CAUSE SEVERE BURNS.
●
DO NOT REACH AROUND PROTECTIVE SHROUDS OR ATTEMPT MAINTENANCE
UNTIL UNIT HAS BEEN ALLOWED TO COOL.
1-5
：
RISK TO HEALTH
●
DO NOT USE COMPRESSED AIR FOR BREATHING. WHEN SPRAYING USE
RESPIRATORY PROTECTION IN A WELL VENTILATED AREA.
●
COMPRESSED AIR FROM THE UNIT MAY CONTAIN POISONOUS VAPOUR WHICH
IS NOT SUITABLE FOR INHALING AND COULD BE HARMFUL TO YOUR HEALTH.
●
WORK IN AN AREA WITH GOOD VENTILATION.
1-6
：
RISK FROM MOVING PARTS
●
UNIT STARTS AUTOMATICALLY, DO NOT OPERATE WITH BROKEN GUARDS OR
COVERS REMOVED.
●
ANY REPAIR REQUIRED ON THE PRODUCT SHOULD BE PERFORMED BY
AUTHORIZED SERVICE CENTER PERSONNEL.
●
DO NOT TOUCH MOVING PARTS.
1-7
：
RISK FROM FLYING OBJECTS
●
ALWAYS WEAR ANSI Z87.1 APPROVED SAFETY GLASSES WITH SIDE SHIELDS
WHEN USING THE AIR COMPRESSOR. ALWAYS WEAR PROPER SAFETY
EQUIPMENT WHILE USING COMPRESSED AIR.
●
DO NOT DIRECT HIGH PRESSURE AIR STREAM TOWARD ANY PARTS OF THE
BODY OR AT OTHER PEOPLE.
●
UNPLUG POWER CORD AND DRAIN AIR FROM TANK BEFORE SERVICING AND
WHENEVER YOU LEAVE FOR THE DAY.
1-8
：
RISK OF PROPERTY DAMAGE WHEN TRANSPORTING COMPRESSOR
●
ALWAYS PLACE COMPRESSOR ON A PROTECTIVE MAT WHEN TRANSPORTING
TO PROTECT AGAINST DAMAGE TO VEHICLE FROM LEAKS.
●
ALWAYS OPERATE COMPRESSOR IN A STABLE POSITION TO PREVENT
ACCIDENTAL MOVEMENT OF THE UNIT.
4