!
Model No. PI-9877
15
T u t o r i a l
Function 7: PLAY (Custom Program)
Playing stored custom program
1.
Turn the Function knob to PLAY. The dis-
play briefly shows
F7
, then
100
(for a scale-
factor setting of 100%).
2.
Press
(START) to start playing the
default custom program.
After the program has played for several sec-
onds, press
and hold
(STOP).
If you are using a voltage sensor, be sure to stop the
program before it exceeds 10 V.
Scale Factor of 50%
3.
Turn the Coarse knob to change the Scale
Factor to 50%.
Press
(START) to play the program
again; each voltage point is now half of what
it was before. Press
and hold
(STOP).
Graph type set to 0
4.
Press
and hold
(SET); the display shows
1
, the graph-type setting;
while holding
the
button, turn the Coarse knob to change the
graph type setting to 0.
Press
(START) to play the function; the
voltage ramps smoothly through the program
rather than jumping from one level to the
next.
Press
and hold
(STOP).
Summary of Contents for PI-9877
Page 1: ... DC Power Supply PI 9877 Instruction Manual 012 09125A ...
Page 18: ... DC Power Supply 18 T u t o r i a l ...
Page 36: ......