®
Model No. CI-6537
Force Sensor
7
-1.60 volts equals a force of -10 newtons (in other words, a pull of 10
newtons).
If you want to calibrate for greater accuracy, follow the instructions in
Appendix C.
Using the Force Sensor with PASCO
Interfaces
The instructions in this manual are intended for those using the Force
Sensor with the PASCO 500 or 750
ScienceWorkshop
interfaces.
Using the Force Sensor with older PASCO interfaces may require
additional instructions. If you have any questions, please contact
Technical Support (See Appendix D of this manual).
